Fuel Injection Pump Driven Sprocket Installation
|
Fuel Injection Pump Driven Sprocket Installation
|
Special Tools
For equivalent regional tools, refer to
Special Tools
1.
|
Install the fuel injection pump driven sprocket (2) in the correct position (1).
|
2.
|
Install the fuel injection pump driven sprocket nut (3).
|
3.
|
Install the
EN 6347
holder (1) with
EN 956-1
extension (2) to the fuel injection pump driven sprocket .
|
4.
|
Refer to
Fastener Caution
.
Tighten the fuel injection pump driven sprocket nut to
50 Nm (37 lb ft)
.
|
5.
|
Remove the
EN 6347
holder .
with
EN 956-1
extension from the fuel injection pump driven sprocket.
|