Fuel Pump Fuel Reservoir Installation
| Fuel Pump Fuel Reservoir Installation |
| 1. |
Install the fuel reservoir (2).
|
|
| 2. |
Install the exhaust pressure sensor bracket.
|
|
| 3. |
Refer to
Fastener Caution
.
Install the 3 exhaust pressure sensor bolts (3) and tighten to 9 Nm (80 lb in) . |
|
| 4. |
Install the 2 injection fuel feed hose (1, 5) and fasten the injection fuel feed hose clamp (4).
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
