Piston and Connecting Rod Assemble
|
Piston and Connecting Rod Assemble
|
Special Tools
EN-46745
Piston Pin Retainer Remover/Installer
For equivalent regional tools, refer to
Special Tools
.
1.
|
Assemble the piston to the connecting rod (3).
|
2.
|
Install the piston pin (1).
|
3.
|
Install the piston pin retainers using the
EN-46745
remover/installer .
|
4.
|
Warning
|
Handle the piston carefully. Worn piston rings are sharp and may cause bodily injury.
|
|
|
|
|
Assemble the NEW piston rings to the piston (2). Use a suitable tool to expand the rings.
|