Piston, Connecting Rod, and Bearing Removal
|
|
Piston, Connecting Rod, and Bearing Removal
|
|
1.
|
Rotate the crankshaft to a position where the connecting rod bolts are the most accessible.
|
|
2.
|
Mark the connecting rod and cap with the cylinder position. Also mark their orientation. This will ensure the caps and connecting rods are re-assembled properly.
|
|
3.
|
Remove any ridge at the top of the cylinder bore to avoid damage to the piston ring lands.
|
|
4.
|
Remove the connecting rod bolts (2).
|
|
5.
|
Remove the connecting rod cap (1).
|
|
6.
|
Remove the connecting rod bearing (3).
|
|
7.
|
Remove the piston and connecting rod assembly (4).
|
