Timing Belt Installation
Timing Belt Installation |
Special Tools
• |
EN-46789
Camshaft Locking Tool
|
• |
EN 49437
Flywheel Holder
|
For equivalent regional tools, refer to Special Tools
1. |
Install the timing belt (1). |
2. |
Refer to
Fastener Caution
.
Release the timing belt tensioner and tighten the timing belt tensioner nut (2) to 25 Nm (19 lb ft) to tension the timing belt (1). |
3. |
Remove the
EN 49437
holder (1) out of the flywheel (2) to unlock the cranckshaft.
|
4. |
Remove the
EN-46789
locking tool (1) out of the camshaft housing.
|
5. |
Install the camshaft housing closure bolt.
|
6. |
Check the timing:
Turn the engine 720 degrees clockwise and check the correspondence of the markings at the timing components. |