Turbocharger Oil Return Pipe Installation

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Turbocharger Oil Return Pipe Installation

1.	Install the NEW turbocharger oil return pipe seal and gasket.

2.	Install the turbocharger oil return pipe (2).

3.	Refer to Fastener Caution . Install the 3 turbocharger oil return hose bolts (1,3) and tighten to 9 Nm (80 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.