SAAB WIS ONLINE

Turbocharger Oil Return Pipe Replacement

Turbocharger Oil Return Pipe Replacement



Callout Component Name

Preliminary Procedure

1. Remove the engine cover. Refer to Engine Cover Replacement .

2. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement (LDK/A20NHT) Exhaust Manifold Heat Shield Replacement (LBS/A20DTH) .

3. Remove the charge air cooler inlet pipe from turbo to get access. Refer to Charge Air Cooler Inlet Pipe and Outlet Pipe Replacement .


1

Turbocharger Oil Return Pipe Fastener (Qty: 2)

Refer to Fastener Caution .

Tighten

9 Nm (80 lb in)

2

Turbocharger Oil Return Pipe Fastener

Tighten

25 Nm (18 lb ft)

3

Turbocharger Oil Return Pipe

Procedures

Discard the old gasket and install NEW turbocharger oil return pipe gaskets prior to installation of the pipe.