Balance Shaft Cleaning and Inspection
|
Balance Shaft Cleaning and Inspection
|
1.
|
Clean the balance shafts (2) in solvent.
|
2.
|
Inspect the bearing (1) surfaces on the balance shafts for scoring or unusual wear.
|
3.
|
Inspect the balance shaft drive sprockets for wear, damage, or missing teeth.
|
4.
|
Measure the rear bearing journals on the balance shafts, the journals should be 36.723-36.743 mm (1.4458-1.4466 in) in diameter.
|
5.
|
Measure the front bearing journals on the balance shafts, the front bearing journals should be 20.020-20.000 mm (0.7881-0.7874 in) in diameter.
|
6.
|
When the balance shafts have been installed in the engine block, check for smooth rotation, sticking, binding, or roughness.
|