SAAB WIS ONLINE

Engine Front Cover and Oil Pump Installation

Engine Front Cover and Oil Pump Installation



1. Install the engine front cover (1) with a new gasket (2).


2. Refer to Fastener Caution .

Note

The center bolt (1) should be tightened last.


Install the engine shield bolts and tighten to 25 Nm (18 lb ft) .


3. Install the long water pump bolt (1) and tighten to 25 Nm (18 lb ft) .

4. Install the accessory drive belt tensioner (1).


5. Install the accessory drive belt tensioner bolt and tighten to 45 Nm (33 lb ft) .