Engine Oil and Oil Filter Replacement (Filter with Cap and Seal)
|
Engine Oil and Oil Filter Replacement (Filter with Cap and Seal)
|
Callout
|
Component Name
|
Preliminary Procedure
Remove the engine side shield. Refer to
Engine Sight Shield Replacement
.
|
1
|
Oil Filter with Cap and Seal Fastener
Refer to
Fastener Caution
.
Procedures
Remove and Install the Oil Filter Cap with EN-6150 Oil Filter Wrench.
Tighten
25 Nm (18 lb ft)
Special Tools
EN-6150
Oil Filter Spanner
|
2
|
Oil Filter with Cap and Seal
Procedures
Remove the O-seal ring with a small screwdriver and use a new O-seal ring.
|
3
|
Oil Filter
|