SAAB WIS ONLINE

Automatic Transmission Flex Plate Installation

Automatic Transmission Flex Plate Installation



Special Tools

• EN 46106 Flywheel Holding Tool

• EN 45059 Torque Angle Sensor Kit


For equivalent regional tools, refer to Special Tools .



1. Install the automatic transmission flex plate (2).


2. Loosely install the NEW 8 automatic transmission flex plate bolts (1).

3. Install the EN 46106 holder.


4. Tighten the 8 automatic transmission flex plate bolts (1) to 30 Nm (22 lb ft) .


5. Tighten the NEW 8 automatic transmission flex plate bolts an additional 45 degrees using the EN 45059 kit.

6. Remove the EN 46106 holder .