Camshaft Position Actuator Replacement - Bank 2 (Left Side) Intake

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Camshaft Position Actuator Replacement - Bank 2 (Left Side) Intake

Removal Procedure

1.	Remove the left exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust .

2.	Remove the intake camshaft position actuator fastener (1).

3.	Remove the left intake camshaft position actuator (2).

Installation Procedure

1.	Locate the intake camshaft position actuator to the camshaft and loosely install the fastener.

2.	Refer to Torque Reaction Against Timing Drive Chain Caution . Note Use an open-end wrench at the camshaft hex to prevent camshaft/crankshaft rotation. Tighten the camshaft position actuator fastener (1). Refer to Camshaft Position Actuator Installation - Left Side Intake .

3.	Install the left exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.