Engine Coolant Thermostat Housing Installation

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Engine Coolant Thermostat Housing Installation

1.	Install the NEW engine coolant thermostat housing gasket (3).

2.	Install the engine coolant thermostat housing (2).

3.	Refer to Fastener Caution . Install the 3 engine coolant thermostat housing bolts (1) and tighten to 10 Nm (89 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.