SAAB WIS ONLINE

Engine Flywheel Installation

Engine Flywheel Installation



Special Tools

• EN 46106 Flywheel Holding Tool

• EN 45059 Torque Angle Sensor Kit .


For equivalent regional tools, refer to Special Tools .



1. Install the engine flywheel (2).


2. Loosely install the NEW 8 engine flywheel bolts (1).

3. Install the EN 46106 engine flywheel holding tool.


4. Refer to Fastener Caution .

Tighten the NEW 8 engine flywheel bolts (1) to 30 Nm (22 lb ft) .


5. Tighten the NEW 8 engine flywheel bolts an additional 75 degrees using the EN 45059 angle meter.

6. Remove the EN 46106 holder .