Exhaust Turbocharger Inlet Pipe Installation - Right Side

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Exhaust Turbocharger Inlet Pipe Installation - Right Side

1.	Install the NEW turbocharger exhaust pipe gasket (1).

2.	Install the exhaust turbocharger inlet pipe bank 1 (2).

3.	Refer to Fastener Caution . Install the 5 NEW turbocharger exhaust pipe bolts (3) and tighten to 30 Nm (22 lb ft) .

4.	Install the exhaust heat shield bank 1 (2).

5.	Install the 5 exhaust heat shield bolts (1) and tighten to 10 Nm (89 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.