Knock Sensor Installation - Bank 1

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Knock Sensor Installation - Bank 1

1.	Note The knock sensor connector must be oriented parallel to oil pan rail. Install the knock sensor bank 1 (2).

2.	Refer to Fastener Caution . Install the knock sensor bolt row 1 (1) and tighten to 23 Nm (17 lb ft) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.