Oil Pan Removal

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Oil Pan Removal

1.	Remove the 11 oil pan bolts from cylinder block.

2.	Remove the 2 oil pan bolts from crankshaft rear oil seal housing.

3.	Using the pry points located at the edge of the oil pan separate the RTV sealant.

4.	Remove the oil pan from the cylinder block.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.