Water Outlet Installation

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Water Outlet Installation

1.	Install the water outlet gasket (4) and O-ring (5).

2.	Install the heater inlet pipe O-ring (3).

3.	Install the heater inlet pipe (2).

4.	Refer to Fastener Caution . Install the upper heater inlet pipe bolt (1) and tighten to 9 Nm (80 lb in) .

5.	Install the water outlet (2).

6.	Install the water outlet bolts (1) and tighten to 10 Nm (89 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.