Callout
|
Component Name
|
Warning
|
Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.
|
|
|
|
|
Preliminary Procedure
If equipped, remove the fuel tank protector. Refer to
Underbody Rear Air Deflector Replacement
.
|
1
|
Fuel Filter Assembly Retainer
Refer to
Fastener Caution
.
Procedures
1.
|
Release the fuel filter assembly retainer with a suitable screw driver.
|
2.
|
Connect a rubber hose to the retainer pipe to minimize fuel spill.
|
3.
|
Drain the fuel filter assembly.
|
Tighten
2 Nm (18 lb in).
|
2
|
Fuel Filter Assembly Cover
Procedures
1.
|
Release the fuel filter assembly cover using a spanner.
|
2.
|
Remove the fuel filter assembly cover.
|
Tighten
25 Nm (18 lb ft).
|
3
|
Fuel Filter
Warning
|
Do not use a screwdriver or punch to remove the seal. Using a screwdriver or punch to remove the seal may damage the aluminum housing sealing surface.
|
|
|
|
|
Procedures
Install NEW fuel filter assembly cover gasket.
|