SAAB WIS ONLINE

Fuel Injection Fuel Rail Assembly Replacement

Fuel Injection Fuel Rail Assembly Replacement



Callout Component Name
Warning

Gasoline or gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.



Preliminary Procedure

1. Remove the engine cover. Refer to Engine Cover Replacement .

2. Remove the battery negative terminal connection. Refer to Battery Negative Cable Disconnection and Connection .

3. Release the electrical connector.


1

Fuel Injector Fuel Rail Assembly Inlet and Outlet Pipe Fastener (Qty: 5)

Refer to Fastener Caution .

Procedures

Loosen both ends of the fuel pipes before tightening to avoid leakage.

Tighten

Pipes to fuel rail 19 Nm (14 lb ft)

2

Fuel Injection Fuel Rail Fuel Pressure Sensor

Tighten

35 Nm (26 lb ft)

3

Fuel Injector Fuel Rail Assembly Fastener (Qty: 2)

Tighten

25 Nm (18 lb ft)

4

Fuel Injector Fuel Rail Assembly