DTC P0219
DTC P0219 |
Diagnostic Instructions |
• |
Perform the
Diagnostic System Check - Vehicle
prior to using this diagnostic procedure.
|
• |
Review
Strategy Based Diagnosis
for an overview of the diagnostic approach.
|
• |
Diagnostic Procedure Instructions
provides an overview of each diagnostic category.
|
DTC Descriptor |
DTC P0219
Engine Overspeed
Circuit/System Description |
Note | ||
This DTC is used for information only. This DTC does NOT indicate there is a condition with the crank sensor or the engine control module (ECM). |
This DTC is used to indicate that the engine speed exceeded the fuel cutoff limit in gear. This DTC may set if the transmission is placed in a low gear while driving down a steep grade or traveling at a high speed.
Conditions for Running the DTC |
• |
The engine is running.
|
• |
The DTC runs continuously once the above condition is met.
|
Conditions for Setting the DTC |
The ECM detects the engine speed is greater than the threshold for greater than 0.5 s.
Action Taken When the DTC Sets |
DTC P0219 is a Type C DTC.
Conditions for Clearing the DTC |
DTC P0219 is a Type C DTC.
Reference Information |
Electrical Information Reference
• |
Circuit Testing
|
• |
Connector Repairs
|
• |
Testing for Intermittent Conditions and Poor Connections
|
• |
Wiring Repairs
|
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions