SAAB WIS ONLINE

Crankshaft Position Sensor Replacement

Crankshaft Position Sensor Replacement



Callout Component Name

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove the starter motor. Refer to Starter Replacement (2.0L Diesel) Starter Replacement (LDK/A20NHT) Starter Replacement (LAU/A28NER) .


1

Crankshaft Position Sensor Fastener

Refer to Fastener Caution .

Procedures

Disconnect the electrical connector.

Tighten

10 Nm (89 lb in)

2

Crankshaft Position Sensor