SAAB WIS ONLINE

Fuel Feed Intermediate Pipe Replacement

Fuel Feed Intermediate Pipe Replacement



Callout Component Name

Preliminary Procedure

1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

2. Remove the charge air cooler inlet air tube. Refer to Charge Air Cooler Inlet Air Tube Replacement .

3. Remove the fuel pump cover. Refer to Fuel Pump Cover Replacement .


1

Fuel Feed Intermediate Pipe Fastener (Qty: 2)

Warning

Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury.

After relieving the system pressure, a small amount of fuel may be released when servicing the fuel lines or connections. In order to reduce the chance of personal injury, cover the regulator and the fuel line fittings with a shop towel before disconnecting. This will catch any fuel that may leak out. Place the towel in an approved container when the disconnection is complete.


Refer to Fastener Caution .

Tighten

30 Nm (22 lb ft)

2

Fuel Feed Intermediate Pipe