SAAB WIS ONLINE

Exhaust Muffler with Resonator, Exhaust, and Tail Pipe Replacement (LDK/A20NHT)

Exhaust Muffler with Resonator, Exhaust, and Tail Pipe Replacement (LDK/A20NHT)

Removal Procedure

Refer to Exhaust Service Warning .

Refer to Protective Goggles and Glove Warning .


1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the exhaust front pipe (1) from the muffler assembly fasteners (2).


3. With the aid of an assistant, lower the exhaust system from the vehicle.

4. Remove the exhaust system (1) from the brackets in 5 places (2).


5. Discard the gasket.


Installation Procedure


1. With the aid of an assistant, install the exhaust system to the vehicle.

2. Install a new gasket between the exhaust front pipe and the muffler assembly.

3. Install the exhaust system (1) to the bracket in 5 places (2).


4. Refer to Fastener Caution .

Install the exhaust front pipe (1) to the muffler assembly fasteners (2) and tighten to 25 Nm (18 lb ft) .


5. Lower the vehicle.