SAAB WIS ONLINE

Body Control Module Replacement (Right Hand Drive)

Body Control Module Replacement (Right Hand Drive)



Callout Component Name

Preliminary Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

2. Remove the Instrument Panel Outer Trim Cover. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .

3. Remove instrument panel compartment. Refer to Instrument Panel Compartment Replacement .


1

Inner Electrical Center


Procedures

1. Disconnect the lower three electrical connectors on the body control module.

2. Clip out the inner electrical center.


2

Body Control Module


Procedures

1. Disconnect the upper four electrical connectors on the body control module.

2. Pull out the body control module of the bracket.

3. For programming and set up information, refer to Control Module References .