Diagnostic Repair Verification
|
|
Diagnostic Repair Verification
|
|
1.
|
Install any components or connectors that have been removed or replaced during diagnosis.
|
|
2.
|
Perform any adjustment, programming or setup procedures that are required when a component or module is removed or replaced.
|
|
4.
|
Ignition OFF, all vehicle systems OFF, this may take up to 2 minutes.
|
|
5.
|
If the repair was related to a DTC, duplicate the Conditions for Running the DTC and use the Freeze Frame/Failure Records, if applicable, in order to verify the DTC does not reset. If the DTC resets or another DTC is present, refer to the
Diagnostic Trouble Code (DTC) List - Vehicle
and perform the appropriate diagnostic procedure.
Or
If the repair was symptom related, duplicate the conditions under which the customer concern occurred to verify the repair. If the customer concern reoccurs or another symptom is present, return to
Symptoms - Vehicle
and perform the appropriate symptom diagnostic.
|
