Headlamp High Beam Control Module Scan Tool Information
|
Headlamp High Beam Control Module Scan Tool Information
|
High Beam Control Module Scan Tool Data Parameters
Parameter
|
System State
|
Expected Value
|
Description
|
Operating Conditions:
Ignition ON
|
Automatic Headlamp Switch Signal
|
-
|
Automatic
|
The scan tool displays either Off, Park Lamps, Automatic or Low Beam.
|
Front Fog Lamps Switch
|
-
|
Active/Inactive
|
The scan tool displays Active or Inactive. This is the state of the front fog lamps switch.
|
High Beam Select Switch
|
-
|
Off
|
The scan tool displays either Off, High Beam Headlamps or Flash. This is the state of the high beam select switch.
|
Vehicle Speed
|
-
|
0
|
The scan tool displays the vehicle speed in km/h (MPH).
|
High Beam Control Module Scan Tool Output Controls
Output Control
|
Description
|
Inside Rearview Mirror Shading
|
This function is used to command the inside rear view mirror Brighter and Dimmer.
|
Intellibeam
|
This function is used to command the headlamps either Disabled, High Beam Active or Low Beam Active.
|
CAN Bus Configuration Learn
|
This function is used to reset the source ID for CAN Bus communications.
|