SAAB WIS ONLINE

Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information

Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information


Sensing and Diagnostic Module Scan Tool Data Parameters

Parameter Expected Value Definition
Operating Conditions: Ignition ON

Base Model Part Number

Varies

The scan tool displays the part number of the SDM which is stored in non volatile memory.

Deployment Loop 1-18 Enable Status

Enabled/Disabled

The diagnostic tool shows Activated or Not activated. This is the status of the gas generator module where it may be triggered when it is activated.

Deployment Loop 1-18 Learn Status

Learned/Not Learned

The scan tool displays Learned or Not learned. Learned is displayed if the SDM has the number loop programmed with the present connected inflator module.

Deployment Loop 1-18 Resistance

Ohms

The scan tool displays the resistance of the loop with the inflator module connected.

Deployment Loop 1-18 Type

Equipped/Not Equipped

The scan tool displays the resistance of the loop with the inflator module connected. Not Used, Left Frontal Deployment Loop Stage 1, Right Frontal Deployment Loop Stage 1, Left Frontal Deployment Loop Stage 2, Left Frontal Deployment Loop Stage 2, Left Front Seat Pretensioner, Right Front Seat Pretensioner, Left Front Side Bag, Right Front Side Bag, Left Roof Rail Airbag, Right Roof Rail Airbag

Driver Seat Belt Sensor Enable Status

Enabled/Disabled

The scan tool displays if the seat belt sensor in the seat belt buckle is enabled

Driver Seat Belt Sensor Learn

Learned/Not learned

The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the driver seat belt sensor.

Driver Seat Position Sensor Learn Status

Learned/Not Learned

The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the driver seat position sensor.

Driver Seat Belt Status

Buckled/Unbuckled

The scan tool displays Buckled or Unbuckled. This is the state of the driver seat belt switch in the driver seat belt buckle.

Impact Sensor 1-8 Enable Status

Enabled/Disabled

The scan tool displays Enabled or Disabled. This is the state of the sensor.

Impact Sensor 1-8 Learn Status

Learned/Not learned

The scan tool displays Learned or Not learned. Learned is displayed if the SDM has the sensor programmed.

Impact Sensor 1-8 Type

Equipped/Not Equipped

The scan tool displays the type of Side Impact Sensor connected. Not Equipped, Left Front Side Impact Sensor, Right Front Side Impact Sensor, Left Rear Side Impact Sensor, Right Rear Side Impact Sensor.

Passenger Seat Belt Status

Buckled/Unbuckled

The scan tool displays Buckled or Unbuckled. This is the state of the passenger seat belt switch in the passenger seat belt buckle.

Passenger Airbag Disabled Switch

ON/OFF

The scan tool displays ON or OFF Passenger Disabled Switch whenever the passenger airbag is enabled or disabled manually.

Passenger Airbag ON Indicator

ON/OFF

The scan tool displays ON when the passenger indicator is illuminated and OFF when passenger indicator is disabled.

Passenger Seat Belt Sensor Enable Status

Enabled/Disabled

The diagnostic tool shows Activated or Not activated. This is the status of the indicator for passenger seatbelt warning, it is lit when it is activated.

Passenger Seat Belt Sensor Learn Status

Learned/Not learned

The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the passenger seat belt reminder sensor.

Passenger Seat Belt Reminder Indicator Enable status

Enabled/Disabled

The scan tool displays Enabled or Disabled is displayed if the SDM has the passenger seat belt indicator programmed.

Passenger Seat Belt Reminder Indicator Learn Status

Learned/Not Learned

The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the passenger seat belt reminder sensor.

Passenger Seat Position Enable Status

Enabled/Disabled

The scan tool displays if the seat position sensor of the passenger seat is enabled

Passenger Seat Position Sensor Learn Status

Learned/Not Learned

The scan tool displays Learned or Not learned. Learned is displayed if the SDM is properly programmed for the passenger seat position sensor.

Enabled/Disabled

Valid/Invalid

The scan tool displays the primary key that the SDM has stored to memory.

Vehicle Identification Number

Varies

The VIN number of the vehicle programmed into the SDM.