Trailer Lamp Control Module Scan Tool Information
Trailer Lamp Control Module Scan Tool Information |
Trailer Interface Control Module Scan Tool Data Parameters
Parameter | System State | Expected Value | Description |
Operating Conditions:
Ignition ON
|
|||
Battery Voltage
|
-
|
Varies 12-14 V
|
The scan tool displays volts. This is the voltage of the trailer lighting converter.
|
Brake Pedal Switch Status
|
-
|
Inactive
|
The scan tool displays Active when the brake pedal is pressed. The scan tool displays Inactive when the brake pedal is released.
|
Key in Ignition Status
|
-
|
Active
|
The scan tool displays Active when the Ignition is ON.
|
Trailer Connection Detected
|
-
|
No
|
The scan tool displays Yes if a trailer is connected to the vehicle.
|
Trailer Interface Control Module Scan Tool Output Controls
Output Control | Description |
Left Trailer Tail Lamp
|
Commands the left trailer tail lamp ON and OFF
|
Left Trailer Turn Signal Lamp
|
Commands the left trailer turn signal lamp ON and OFF
|
Left Auxiliary Tail and Brake Lamp
|
Commands the left auxiliary tail and brake lamp ON and OFF
|
Left Rear Auxiliary Turn Signal Lamp
|
Commands the left rear auxiliary turn signal lamp ON and OFF
|
Left Tail Lamp
|
Commands the left tail lamp ON and OFF
|
Right Trailer Tail Lamp
|
Commands the right trailer tail lamp ON and OFF
|
Right Trailer Turn Signal Lamp
|
Commands the right trailer turn signal lamp ON and OFF
|
Right Auxiliary Tail and Brake Lamp
|
Commands the right auxiliary tail and brake lamp ON and OFF
|
Right Rear Auxiliary Turn Signal Lamp
|
Commands the right rear auxiliary turn signal lamp ON and OFF
|
Right Tail Lamp
|
Commands the right tail lamp ON and OFF
|
Trailer Brake Lamps
|
Commands the trailer brake lamps ON and OFF
|
Trailer Backup Lamps
|
Commands the trailer backup lamps ON and OFF
|
Trailer Fog Lamp(s)
|
Commands the trailer fog lamp(s) ON and OFF
|