SAAB WIS ONLINE

Accessory Power Receptacle Replacement

Accessory Power Receptacle Replacement


Special Tools

BO-48871 Cigar Lighter Socket Remover

For equivalent regional tools, refer to Special Tools .

Removal Procedure


1. Remove the auxiliary power outlet fuse from the fuse block.


2. Remove the receptacle:

2.1. Look into the receptacle. There are two 3 mm (0.11 in) tab windows 12 mm (0.47 in) from the front of the receptacle. The EL 42059 Remover pushes the plastic latches from these tab windows and the receptacle can be pulled straight out.

2.2. Use the BO-48871 Remover to pull the receptacle straight out.

2.3. Remove the electrical connector.


Installation Procedure


1. Connect the electrical connector to the receptacle.


2. Route the connector through the retainer. Align the accessory power receptacle retainer to the slot in the opening.

3. Install the retainer by pressing into place fully seated.

4. Connect the electrical connector to the receptacle.

5. Align the tabs on the receptacle to the slots in the retainer. Install the accessory power receptacle by pressing into place until fully seated.

6. Install the accessory power receptacle fuse.