Front Wheel Drive Intermediate Shaft Installation
| Front Wheel Drive Intermediate Shaft Installation |
Special Tools
| • |
DT-113-2
Bracket
|
|
| • |
DT-622-A
Adapter
|
|
| • |
DT-49103
Fitting Drift
|
|
| • |
DT-49104
Protective Collar
|
|
For equivalent regional tools, refer to Special Tools .
| 1. |
Install the
DT-49104
protective collar (1) to the intermediate shaft (2), and tap in the intermediate shaft (2) using the
DT-49103
fitting drift (3) and a rubber mallet.
|
|
| 2. |
Remove the
DT-49104
protective collar and apply grease to the splines. Refer to
Adhesives, Fluids, Lubricants, and Sealers
for recommended grease.
|
|
| 3. |
Install the transfer case intermediate shaft retaining ring (1).
|
|
| 4. |
Remove the transfer case (3) from the
adapter
DT-622-A (2) and
bracket
DT-113-2 (1).
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
