SAAB WIS ONLINE

Selector and Shift Lever Cable Bracket Replacement

Selector and Shift Lever Cable Bracket Replacement


Special Tools

DT-6042-A Dismantling Key

For equivalent regional tools, refer to Special Tools .

Removal Procedure


1. Remove the battery tray. Refer to Battery Tray Replacement (Diesel) Battery Tray Replacement (LDK/A20NHT) .

2. Remove shift lever and selector lever cable (2) from transmission control housing (3) using DT-6042-A dismantling key.


3. Remove shift lever and selector lever cable from shift lever and selector lever cable bracket (1).

4. Remove the two shift lever and selector lever cable bracket fasteners (1).


5. Remove shift lever and selector lever cable bracket (2).


Installation Procedure


1. Install shift lever and selector lever cable bracket (2).


2. Refer to Fastener Caution in the Preface section.

Install the two shift lever and selector lever cable bracket fasteners (1) and tighten to 20 Nm (15 lb ft) .

3. Install shift lever and selector lever cable (2) to shift lever and selector lever cable bracket (1).


4. Install shift lever and selector lever cable to transmission control housing (3).

5. Install the battery tray. Refer to Battery Tray Replacement (Diesel) Battery Tray Replacement (LDK/A20NHT) .