Transmission Rear Mount Bracket Replacement
|
|
Transmission Rear Mount Bracket Replacement
|
|
Callout
|
Component Name
|
Warning
|
|
To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.
|
|
|
|
|
|
Refer to
Safety Glasses Warning
.
Preliminary Procedure
|
2.
|
|
Warning
|
|
In order to avoid oil pan damage and possible engine failure, insert a block of wood that spans the width of the oil pan bottom between the oil pan and the jack support.
|
|
|
|
|
|
Remove the engine shield. Refer to
Engine Shield Replacement
.
|
|
1
|
Transmission Rear Mount Bracket Fastener (Qty: 4)
Refer to
Fastener Caution
.
Procedures
Support the transmission.
Tighten
100 Nm (74 lb ft)
|
2
|
Transmission Rear Mount Bracket
|
