Master Cylinder Reservoir Replacement (Right Hand Drive)
|
|
Master Cylinder Reservoir Replacement (Right Hand Drive)
|
|
Callout
|
Component Name
|
Refer to
Brake Fluid Irritant Warning
.
Refer to
Brake Fluid Effects on Paint and Electrical Components Caution
.
Preliminary Procedure
|
1.
|
With the engine OFF, apply the brake pedal several times until the brake pedal becomes firm to deplete the vacuum brake booster vacuum reserve.
|
|
2.
|
Remove the brake fluid from the master cylinder reservoir, using a suitable suction device.
|
|
3.
|
Disconnect the brake fluid level sensor electrical connector.
|
|
1
|
Master Cylinder Reservoir Bolt
Refer to
Fastener Caution
.
Tighten
3.5 Nm (40 lb in)
|
2
|
Clutch Master Cylinder Hose
Procedures
|
1.
|
If equipped, disconnect the clutch master cylinder hose from the brake master cylinder reservoir.
|
|
2.
|
Cap the brake fluid reservoir outlet and plug the clutch master cylinder hose inlet to prevent brake fluid loss and contamination.
|
|
3
|
Master cylinder reservoir
Procedures
|
1.
|
If installing a replacement reservoir on manual transmission vehicles, twist the cap off of the master cylinder reservoir.
|
|
2.
|
Ensure the outlet port is free from debris and contamination.
|
|
3.
|
Fit new seals. Do NOT re-use seals.
|
|
4.
|
Lubricate the seals with clean DOT 3 motor vehicle brake fluid.
|
|
5.
|
Fill the master cylinder reservoir.
|
|
