SAAB WIS ONLINE

Braking Action Uneven - Pulls to One Side

Braking Action Uneven - Pulls to One Side

Test Description

The numbers below refer to the step numbers on the diagnostic table.

4

Suspension components that are not operating properly may cause a disturbance to the vehicle during application of the brake system.

5

Steering components that are not operating properly may cause a disturbance to the vehicle during application of the brake system.


Step Action Yes No
DEFINITION: Vehicle pulls to one side only when braking.

1

Were you sent here from the Hydraulic Brake Symptom table?

Go to

Go to Symptoms - Hydraulic Brakes

2


1. Inspect the hydraulic brake system for the following conditions.

• Kinked, pinched or damaged brake pipe or flexible brake hose

• Sticking or improperly operating caliper piston

• Brake fluid leak

2. Adjust, repair or replace components as necessary. Refer to Hydraulic Brake System Diagnosis .


Did you find and correct a condition?

Go to

Go to

3


1. Inspect the disc brake system for the following conditions.

• Contaminated linings

• Glazed linings

• Distorted, cracked or damaged linings on one side

• Loose, damaged or missing caliper hardware and/or lining hardware

• Incorrect linings on one side

• Hard spots, heat checks, bluing discoloration of rotor friction surfaces; possibly due to brake drag

• Glazed rotor friction surfaces

• Bent or damaged caliper or mounting component

2. Adjust, repair or replace components as necessary. Refer to Disc Brake System Diagnosis .


Did you find and correct a condition?

Go to

Go to




1. Inspect the suspension system for the following conditions.

• Incorrect tire pressures

• Loose suspension component connections

• Excessively worn or damaged suspension components

2. Adjust, repair or replace components as necessary. Refer to Symptoms - Hydraulic Brakes .


Did you find and correct a condition?

Go to

Go to




1. Inspect the steering system for the following conditions.

• Loose steering component connections

• Excessively worn or damaged steering components

2. Adjust, repair or replace components as necessary. Refer to Symptoms - Power Steering System .


Did you find and correct a condition?

Go to

Go to Symptoms - Hydraulic Brakes

6


1. Install or connect any components that were removed or disconnected during diagnosis.

2. Road test the vehicle in order to confirm proper operation. Refer to Brake System Vehicle Road Test .


Is the condition still present?

Go to

System OK