SAAB WIS ONLINE

Power Steering Pump Replacement (L4)

Power Steering Pump Replacement (L4)



Callout Component Name

1. Remove the right front tire and wheel. Refer to Tire and Wheel Removal and Installation .

2. Remove the drive belt. Refer to Drive Belt Replacement for engine mechanical 2.0L, or Drive Belt Replacement for engine mechanical 2.0L (Diesel).

3. Place drain pans under the vehicle.

4. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.

5. Diesel: Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .

6. Petrol: Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement


1

Power Steering Fluid Reservoir Outlet Hose Clamp

2

Power Steering Fluid Reservoir Outlet Hose

Procedures

Install a NEW power steering gear inlet hose O-ring seal prior to installation of the hose.

3

Power Steering Gear Inlet Hose Retainer

Refer to Fastener Caution .

Tighten

37.5 Nm (28 lb ft)

4

Power Steering Gear Inlet Hose

5

Power Steering Pump Bolt (Qty: 3)

Tighten

21 Nm (16 lb ft)

6

Power Steering Pump

Refer to Using Proper Power Steering Fluid Caution .


Procedures

1. Clean any excess power steering fluid from the vehicle.

2. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .