SAAB WIS ONLINE

Stabilizer Shaft Insulator Replacement

Stabilizer Shaft Insulator Replacement



Callout Component Name

Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

3. For AWD, remove the propeller shaft. Refer to Propeller Shaft Replacement .

4. Disconnect the stabilizer links from the stabilizer shaft. Refer to Stabilizer Shaft Link Replacement (GNA) Stabilizer Shaft Link Replacement (GNB) .

5. Support the rear of the frame assembly, using a suitable jack stand.

6. Release the bolt to the rear transmission mount. Refer to Transmission Rear Mount Replacement or Transmission Rear Mount Replacement .

7. Remove the rear fasteners to the frame the frame to body bolts. Refer to Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNA) Drivetrain and Front Suspension Frame Front Crossmember Replacement (GNB) .

8. Lower the rear of the frame MAX 50 mm, in order to gain clearance to the stabilizer shaft.


1

Stabilizer Shaft Link Fastener (Qty: 2)

Refer to Fastener Caution .

Procedures

Install NEW bolts.

Tighten

22 Nm (16 lb ft) + 30 degrees + 15 degrees

2

Stabilizer Shaft Insulator