SAAB WIS ONLINE

Stabilizer Shaft Replacement (GNE FWD)

Stabilizer Shaft Replacement (GNE FWD)



Callout Component Name

Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

3. Disconnect the stabilizer links from the stabilizer shaft. Refer to Stabilizer Shaft Link Replacement (GNC) Stabilizer Shaft Link Replacement (GNE) .


1

Stabilizer Shaft Insulator Fastener (Qty: 4)

Install NEW clamp bolts.

Refer to Fastener Caution .

Tighten

22 Nm (16 lb ft) + 30 degrees

2

Stabilizer Shaft Bracket (Qty 2)

3

Stabilizer Shaft

Procedures

Replace insulator if necessary.