SAAB WIS ONLINE

Air Conditioning Condenser Replacement (LDK/A20NHT)

Air Conditioning Condenser Replacement (LDK/A20NHT)



Callout Component Name

Preliminary Procedure

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .

2. Remove the front bumper fascia assembly. Refer to Front Bumper Fascia Replacement

3. Remove the front bumper fascia support - right side. Refer to Front Bumper Fascia Support Replacement (Left Side) Front Bumper Fascia Support Replacement (Right Side) .

4. Remove the air cleaner inlet duct. Refer to Air Cleaner Inlet Duct Replacement .

5. Disconnect the A/C refrigerant pressure sensor electrical connector.


1

Front Intake Air Duct Splash Shield

2

Radiator Air Upper Baffle

3

Radiator Air Lower Baffle

4

A/C Evaporator Hose Fastener

Refer to Fastener Caution .

Procedures

Remove the A/C evaporator hose from the A/C condenser and cap hose.

Tighten

20 Nm (15 lb ft)

5

Sealing Washer

Procedures

Remove and discard the sealing washer. Refer to Air Conditioning System Seal Replacement .

6

A/C Compressor and Condenser Hose Fastener

Procedures

Remove the A/C Compressor and Condenser Hose from the A/C Condenser and cap hose.

Tighten

20 Nm (15 lb ft)

7

Sealing Washer

Procedures

Remove and discard the sealing washer. Refer to Air Conditioning System Seal Replacement .

8

Air Conditioning Condenser Assembly

Procedures

Release both upper condenser support brackets.