SAAB WIS ONLINE

Engine Coolant Heater Bracket Replacement (Rear)

Engine Coolant Heater Bracket Replacement (Rear)

Removal Procedure


1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement

2. Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement .

3. Secure the engine coolant heater.


4. Release the engine coolant heater exhaust muffler from the engine coolant heater exhaust muffler bracket. Refer to Engine Coolant Heater Exhaust Muffler Replacement .

5. Release the heater water auxiliary pump bracket from the engine coolant heater bracket. Refer to Heater Water Auxiliary Pump Bracket Replacement .

6. Remove the engine coolant heater bracket fastener (1).


7. Remove the engine coolant heater bracket fastener (2).

8. Remove the engine coolant heater bracket fastener (3).

9. Remove the engine coolant heater bracket.


Installation Procedure


1. Install the engine coolant heater bracket.


2. Refer to Fastener Caution .

Install the engine coolant heater bracket fastener (1) and tighten the fastener to 9 Nm (80 lb in) .

3. Install the engine coolant heater bracket fastener (2) and tighten the fastener to 9 Nm (80 lb in) .

4. Install the engine coolant heater bracket fastener (3) and tighten the fastener to 20 Nm (15 lb ft) .

5. Install the heater water auxiliary pump bracket to the engine coolant heater bracket. Refer to Heater Water Auxiliary Pump Bracket Replacement .

6. Install the engine coolant heater exhaust muffler to the engine coolant heater exhaust muffler bracket. Refer to Engine Coolant Heater Exhaust Muffler Replacement .

7. Release the engine coolant heater.

8. Install the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement .

9. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement