Engine Coolant Heater Control Replacement (Unit)

/ 9-5 (9650) / 2010 / 8. Body / Climate system / Adjustment/replacement / Engine Coolant Heater Control Replacement (Unit)

Removal Procedure

1.	Remove the engine coolant heater housing. Refer to Engine Coolant Heater Cover Replacement (Housing) Engine Coolant Heater Cover Replacement (Housing Cover) .

2.	Remove the 4 fasteners (1) from the engine coolant heater control (2).

3.	Disconnect with caution the electrical connector (1) from the engine coolant heater control (2).

Installation Procedure

1.	Connect the electrical connector (1) to the engine coolant heater control unit (2).

2.	Refer to Fastener Caution . Install the 4 fasteners (1) to the engine coolant heater control (2).

3.	Install the engine coolant heater housing. Refer to Engine Coolant Heater Cover Replacement (Housing) Engine Coolant Heater Cover Replacement (Housing Cover) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.