1
|
Hood
Refer to
Fastener Caution
.
Procedures
1.
|
Loosen the four hood hinge bolts.
|
2.
|
Adjust the hood in order to obtain an even gap on both sides between the hood and the front fender, the front bumper fascia and the body hinge pillar panel and so that the hood is flush with the front fender, the front bumper fascia and the body hinge pillar panel.
|
Adjustment
•
|
Hood to front bumper fascia
(A) 4 mm ± 1 mm (0.16 in ± 0.04 in)
|
•
|
Hood to front fender
(B) 3 mm ± 1 mm (0.11 in ± 0.04 in)
|
•
|
Hood to body hinge pillar panel
(C) 3.0 mm ± 1 mm (0.16 in ± 0.04 in)
|
Tighten
22 Nm (16 lb ft)
|