Front Bumper Fascia Outer Insert Molding Replacement
|
Front Bumper Fascia Outer Insert Molding Replacement
|
Callout
|
Component Name
|
Preliminary Procedure
Remove the front bumper fascia in order to access the locking tabs on the front bumper fascia outer insert molding. Refer to
Front Bumper Fascia Replacement
|
1
|
Front Bumper Fascia Outer Insert Molding
Procedures
1.
|
Using a small flat-bladed tool, pull and release the outer front bumper fascia locking retainer from the front bumper fascia outer insert molding lower grille.
|
2.
|
Release the flat locking tabs from the front bumper fascia.
|
3.
|
Push the front bumper fascia outer insert molding lower grille outward from the front bumper fascia in order to remove.
|
|