Rear Side Door Window Replacement
|
|
Rear Side Door Window Replacement
|
Warning
|
|
Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.
|
|
|
|
|
|
|
1.
|
Position the window all-way down.
|
|
5.
|
Using mask tape, tape off the outer rear side frame to prevent scratches.
|
|
6.
|
|
Note
|
|
Two-component sash window fixing clip must be accessible through opening.
|
Move the rear side door window into assembly opening position (1).
|
|
7.
|
|
Note
|
|
For a clearer understanding, graphic shows the two-part sash window attachment clip removed.
|
Use a marking tool (1) with a shaft diameter of
4 mm / 0.15 in
to release the two-component sash window fixing clips (2).
|
|
8.
|
Release two-component sash window fixing clip (2).
|
|
9.
|
Remove two-component sash window fixing clip.
|
|
10.
|
Remove the rear side door window (1).
|
|
1.
|
|
Note
|
|
Fit two-part sash window retaining clip to window before installing. Sash window recess must be located with bores for sash window attachment clip above assembly aperture.
|
Install the rear side door window (1) from above into the rear side door.
|
|
2.
|
Install the rear side door window (1) into the rear side door window regulator (2).
|
