SAAB WIS ONLINE

Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport)

Driver or Passenger Seat Adjuster Finish Cover Replacement (4/6-Way Hybrid, 6-Way Hybrid Sport)



Callout Component Name

Preliminary Procedure

1. Remove front seat recliner lever. Refer to Driver or Passenger Seat Recliner Lever Replacement .

2. Remove front seat tilt adjuster lever. Refer to Front Seat Tilt Adjuster Lever Replacement (Driver or Passenger Seat 6-Way Hybrid) .

3. Remove front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (2/4/6-Way Hybrid, 6-Way Hybrid Sport) Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (8-Way-Power) .


1

Cap

2

Driver or Passenger Seat Adjuster Finish Cover Fastener

Refer to Fastener Caution .


Procedures

1. Move the front seat to its highest position.

2. Remove the cap.

3. Unscrew the fastener.

4. Remove the adjuster finish cover at the finish cover retainer.

5. Remove the wiring harness connector for the lumbar and high adjuster switch.


Tighten

5 Nm (4 lb ft)

3

Driver or Passenger Seat Adjuster Finish Cover Clip

4

Driver or Passenger Seat Adjuster Finish Cover Retainer

5

Driver or Passenger Seat Adjuster Finish Cover