SAAB WIS ONLINE

Driver or Passenger Seat Replacement (8-Way-Power)

Driver or Passenger Seat Replacement (8-Way-Power)



Callout Component Name

Preliminary Procedure

1. SIR Disabling and Enabling. Refer to SIR Warning .

2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .


1

Cap

2

Driver or Passenger Seat Belt Fastener

Refer to Fastener Caution .

Tighten

5 Nm (44 lb in)

3

Seat Belt Tensioner Cover

4

Driver or Passenger Seat Belt

5

Driver or Passenger Seat Fastener (Qty: 2)


Procedures

1. Move front seat high adjuster in middle position.

2. Disconnect battery.

3. Seat belt release at seat belt tensioner.

4. Disconnect the central wiring harness connector at bottom.

5. Unscrew both fastener at the rail guide.

6. Remove the front seat out of vehicle.


Tighten

20 Nm (15 lb ft)

6

Driver or Passenger Seat