Tracing Powder or Chalk Test
|
Tracing Powder or Chalk Test
|
Clean the weatherstrips and the contact surfaces with cleaning solvent.
1.
|
Apply powder or chalk in an unbroken line to the contact surface of the weatherstrip surrounding the perimeter of the suspected areas.
|
2.
|
Close the panel completely without slamming the panel. Closing the panel completely presses the weatherstrip firmly against the mating surface.
|
3.
|
Inspect the applied line on the weatherstrip. The applied line is marred where contact is good. A corresponding imprint is on the mating surfaces.
|
4.
|
Gaps or irregularities in the powder or the chalk line on the mating surfaces indicate the areas with a poor seal.
|