Crankshaft and Bearing Removal

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 1.6 l petrol / Adjustment/replacement / Crankshaft and Bearing Removal

1.	Identify all the connecting rod bearing caps (1).

2.	Remove the connecting rod bearing caps 1 and 4 (1).

3.	Remove the 4 bolts.

4.	Turn the crankshaft through 180 degrees.

5.	Remove the connecting rod bearing caps 2 and 3 (1).

6.	Remove the 4 bolts.

7.	Identify the crankshaft bearing caps.

8.	Remove the crankshaft bearing caps (1).

9.	Remove the 10 bolts.

10.	Remove the crankshaft.

11.	Remove the crankshaft bearing clips.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.