SAAB WIS ONLINE

Engine Oil Cooler Housing Installation (1.6L LLU)

Engine Oil Cooler Housing Installation (1.6L LLU)



1. Clean the engine oil cooler housing to engine block sealing surfaces.

2. Install NEW gaskets.

3. Install the engine oil cooler inlet pipe (3).


4. Refer to Fastener Caution .

Install the engine oil cooler housing (1) and the 5 engine oil cooler housing bolts (2) and tighten to 25 Nm (19 lb ft) .

5. Install the thermostat housing coolant pipe (2) to the engine oil cooler housing.


6. Fit the 2 bolts (1) for the thermostat housing coolant pipe and tighten to 8 Nm (71 lb in) .