Engine Oil Cooler Installation

/ 9-5 (9650) / 2011 / 2. Engine / Basic engine, 1.6 l petrol / Adjustment/replacement / Engine Oil Cooler Installation

1.	Clean the engine oil cooler to the oil filter housing sealing surfaces.

2.	Install the NEW engine oil cooler gasket (2) and the engine oil cooler (1) to the engine oil cooler housing.

3.	Refer to Fastener Caution . Install the 6 bolts on the engine oil cooler (3) and tighten to 8 Nm (71 lb in) .

4.	Clean the engine oil cooler housing to engine block sealing surfaces.

5.	Install NEW gaskets (2).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.